test
Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • tastiger Friend
    #203794

    I know you guys are busy with repairing the forums and you also have a holiday coming up so perhaps one of the members can answer my problems.

    I am transferring a site to Joomla 3 and I am using Uber University

    Background image will not display on masthead:

    followed the instructions and read through this forum but can’t seem to get it to show. The code I have used is as follows:-

    [Masshead Itemid="611,868,869,870,871,872,873,874,875,876,941,943,944,945,946,947,948,949,950,1008,1009.1010,1011,1012,1013,1014" background="images/joomlart/masthead/blog.jpg" title="InfoNet" ][/Masshead]

    – but the masthead remains blue, however if you right click just under the writing on the masthead and select view background, its hows that the background image is there, but hidden somehow by the blue. You can test it here:-
    http://scm-rpg.com.au/j336/news/infonet/headlines.html

    Jomsocial Register Page will not display on Uber [University] Default

    No matter what I do I can not get the Jomsocial registration to display in the Uber University default template, I had to download JA Sugite to use for Jomsocial registration.

    ….any clues?

    tastiger Friend
    #559690

    Couldn’t edit so I’ve posted again to add:-

    Make that 3 issues

    Just found out that Blog Factory’s editor will not show up in [University] Default either.

    Adam M Moderator
    #559734

    Hi @tastiger,

    1. About the Masshead module, please navigate to back-end >>> Extensions >>> Template Manager >>> choose your template >>> switch to tab General and temporary disable CSS Compression so I can have a look at the code.

    Note : If you’re using another 3rd party extension to optimize CSS code, please temporary disable it too.

    2. About the Jomsocial Register Page and Blog Factory’s editor problem, please provide a screenshot so I can try to reproduce the problem.

    tastiger Friend
    #560171

    sorry I didn’t get a notification that there was a reply.

    Optimise css has been turned off, jomsocial sign up seems to have rectified itself and screen shot of blog factory add item is below (not that there is a lot to see :))

    Thanks in advance


    1. blog-factory
    Adam M Moderator
    #560438

    Hi @tastiger,

    I checked your site but still see that the CSS code has been compressed / optimized make it unreadable, please recheck.

    tastiger Friend
    #560550

    OK – I have gone through and turned of css optimisation on all assigned templates – should be viewable now.

    Adam M Moderator
    #560683

    Hi @tastiger,

    Please open file root_folder/templates/uber/css/template.css and look for this code :

    .masthead .masthead-bg:before {
    background: #0279b3;
    content: "";
    height: 100%;
    left: 0;
    position: absolute;
    top: 0;
    width: 100%;
    z-index: 3;
    opacity: 0.95;
    filter: alpha(opacity=95);
    }

    then change to :

    .masthead .masthead-bg {
    background: #0279b3;
    height: 100%;
    width: 100%;
    background-position: center center;
    }

    tastiger Friend
    #560701

    Many thanks for that – did you happen to replicate my issues with blog factory?

    Adam M Moderator
    #560797

    Hi @tastiger,

    Could you please let me know how can I add new article as in the screenshot so I can investigate the problem ?

    tastiger Friend
    #560847

    <em>@Adam M 460474 wrote:</em><blockquote>Hi @tastiger,

    Could you please let me know how can I add new article as in the screenshot so I can investigate the problem ?</blockquote>

    Sent you a PM with access details

    edit to add:- the details I sent you are good for both front and back end access

    Adam M Moderator
    #560874

    Hi @tastiger,

    Thanks for the back-end account but it’s a bit confuse in the front-end. First, I login to your site via Login button on the top right of site but after that there’s another login form right below the top banner on next screen. In addition, I couldn’t see any menu item like “User Menu” Update Blog, please recheck.

    tastiger Friend
    #561095

    <em>@Adam M 460582 wrote:</em><blockquote>Hi @tastiger,

    First, I login to your site via Login button on the top right of site but after that there’s another login form right below the top banner on next screen. In addition, I couldn’t see any menu item like “User Menu” Update Blog, please recheck.</blockquote>

    Are you using Internet Explorer ? – I just checked and there appears to be an issue with IE – seems as if one is unable to log in to the site when using Internet Explorer.

    I just managed to login OK using Firefox and Chrome.

    If you can try it with another browser and I will start a new thread about the IE issue.

    Thanks for your help so far

    Adam M Moderator
    #561151

    Hi @tastiger,

    Thanks for the info. After I tested again, the result is look like login form work only in IE11 only but didn’t in Chrome / Firefox (see attachment screenshots).


    1. IE11
    2. chrome-firefox
    tastiger Friend
    #561282

    That is interesting I am getting the exact opposite results as you I can log in with all browsers but IE – you can see my post here:
    http://www.joomlart.com/forums/topic/cant-login-using-internet-explorer/

    Adam M Moderator
    #561343

    Hi @tastiger,

    In this case, I will continue the investigation process for Jomsocial in this thread.

Viewing 15 posts - 1 through 15 (of 15 total)

This topic contains 15 replies, has 2 voices, and was last updated by  Adam M 9 years, 9 months ago.

We moved to new unified forum. Please post all new support queries in our New Forum