-
AuthorPosts
-
alioztr Friend
alioztr
- Join date:
- September 2008
- Posts:
- 197
- Downloads:
- 0
- Uploads:
- 21
- Thanks:
- 44
- Thanked:
- 3 times in 1 posts
April 10, 2009 at 9:03 pm #140153when i change my article’s access level to registered, every body can see my article. But i want to show only registered users to my article.
what should i do.
ThanksShannonN FriendShannonN
- Join date:
- July 2006
- Posts:
- 1947
- Downloads:
- 0
- Uploads:
- 9
- Thanks:
- 16
- Thanked:
- 172 times in 49 posts
April 11, 2009 at 3:40 am #300885alioztr;123769when i change my article’s access level to registered, every body can see my article. But i want to show only registered users to my article.
what should i do.
ThanksIt depends on what your Global settings are, If the article settings are set to “use global settings” or not there are many variables aliotzr.
I suggest you set your global settings to those in the attached image, then in your article settings keep as access level = registered, in the Advanced parameters set to Global Settings, I have tested on a local Edenite install and these settings work for me, always refresh your browser cache before trying, also good idea to clean cache and purge expired cache from the admin tools menu just in case 🙂
Hope this helps you
Cheers ShannonN
alioztr Friendalioztr
- Join date:
- September 2008
- Posts:
- 197
- Downloads:
- 0
- Uploads:
- 21
- Thanks:
- 44
- Thanked:
- 3 times in 1 posts
April 11, 2009 at 7:11 am #300899Thank you but i saw all settings are true.
But it is not working. I don’t know what should i do?ShannonN FriendShannonN
- Join date:
- July 2006
- Posts:
- 1947
- Downloads:
- 0
- Uploads:
- 9
- Thanks:
- 16
- Thanked:
- 172 times in 49 posts
April 11, 2009 at 8:20 am #300906alioztr;123817Thank you but i saw all settings are true.
But it is not working. I don’t know what should i do?I really am at a loss to offer any explanations, as I tested the edenite install and when I set an article to registered it was no longer viewable on the frontpage to the public viewer as it is designed to do. I do not believe their is any difference between edenite or Barite as this is a joomla core function
I would try in the advanced settings to not use the Global settings at all, and just see if that changes anything, perhaps setting teh global settings to not having a registered use refreshing the site and then turning globals back to registered etc ?
We could go on like this for hours alioztr, however it makes to many posts in the forum without solving anything, feel free to PM me and I’ll try to assist you furthur
ShannonNalioztr Friendalioztr
- Join date:
- September 2008
- Posts:
- 197
- Downloads:
- 0
- Uploads:
- 21
- Thanks:
- 44
- Thanked:
- 3 times in 1 posts
April 12, 2009 at 7:02 am #301005I send a private message about my site password, please look and you can see same problem.
Thank you againShannonN FriendShannonN
- Join date:
- July 2006
- Posts:
- 1947
- Downloads:
- 0
- Uploads:
- 9
- Thanks:
- 16
- Thanked:
- 172 times in 49 posts
April 12, 2009 at 2:40 pm #301021alioztr;123941I send a private message about my site password, please look and you can see same problem.
Thank you againTested and explained step by step in a long PM it works fine for me here
Cheers ShannonN
1 user says Thank You to ShannonN for this useful post
alioztr Friendalioztr
- Join date:
- September 2008
- Posts:
- 197
- Downloads:
- 0
- Uploads:
- 21
- Thanks:
- 44
- Thanked:
- 3 times in 1 posts
April 13, 2009 at 9:28 am #301094I send a private message again.
Thank youAuthorPostsViewing 7 posts - 1 through 7 (of 7 total)This topic contains 7 replies, has 2 voices, and was last updated by alioztr 15 years, 7 months ago.
We moved to new unified forum. Please post all new support queries in our New Forum
Access level to article
Viewing 7 posts - 1 through 7 (of 7 total)