Joomla Templates Club 406,261 posts

[robcom Friend robcomJoin date: March 2013Posts: 9Downloads:8Uploads:0 Thanks: 3]

#207674

I noticed that in ACM Slideshows (in template JA_hotel) when it sets ” ON “ the full screen mode , buttons stop working.
When you set “OFF” mode for full screen instead they return to work.
I set the class button as by default: ” btn btn-lg-border “.
Any help,please?

[robcom Friend robcomJoin date: March 2013Posts: 9Downloads:8Uploads:0 Thanks: 3]

#575030

<em>@robcom 479309 wrote:</em><blockquote>I noticed that in ACM Slideshows (in template JA_hotel) when it sets ” ON “ the full screen mode , buttons stop working.
When you set “OFF” mode for full screen instead they return to work.
I set the class button as by default: ” btn btn-lg-border “.
Any help,please?</blockquote>

I ‘ve noticed it’s happening ONLY when the site is display on big screen like Imac .
When the site is displayed on a regular screen ( like Macbook air ) the buttons are working .
It’s seem very strange cause is happening on each browser i’ve tested like Safari,Chrome or Firefox.

[Adam M Moderator Adam MJoin date: May 2014Posts: 5159Downloads:33Uploads:66 Thanks: 95 Thanked: 1271 times in 1235 posts]

#575037

Hi @robcom,

Please stay tuned while I’m checking this matter for you and I will reply back shortly.

[Adam M Moderator Adam MJoin date: May 2014Posts: 5159Downloads:33Uploads:66 Thanks: 95 Thanked: 1271 times in 1235 posts]

#575300

Hi @robcom,

Thanks for your patient. Could you please clarify a little bit about this matter as we didn’t see any problem :

1. Do you mean when you click the navigation buttons or when you press the navigation buttons in keyboard ?

2. After enabled / disabled this parameter in back-end, did you check the result in front-end with full screen mode or normal mode ?

[Adam M Moderator Adam MJoin date: May 2014Posts: 5159Downloads:33Uploads:66 Thanks: 95 Thanked: 1271 times in 1235 posts]

#641630

Hi @robcom,

Thanks for your patient. Could you please clarify a little bit about this matter as we didn’t see any problem :

1. Do you mean when you click the navigation buttons or when you press the navigation buttons in keyboard ?

2. After enabled / disabled this parameter in back-end, did you check the result in front-end with full screen mode or normal mode ?

[Adam M Moderator Adam MJoin date: May 2014Posts: 5159Downloads:33Uploads:66 Thanks: 95 Thanked: 1271 times in 1235 posts]

#740292

Hi @robcom,

Thanks for your patient. Could you please clarify a little bit about this matter as we didn’t see any problem :

1. Do you mean when you click the navigation buttons or when you press the navigation buttons in keyboard ?

2. After enabled / disabled this parameter in back-end, did you check the result in front-end with full screen mode or normal mode ?

[robcom Friend robcomJoin date: March 2013Posts: 9Downloads:8Uploads:0 Thanks: 3]

#575627

<em>@Adam M 479799 wrote:</em><blockquote>Hi @robcom,

Thanks for your patient. Could you please clarify a little bit about this matter as we didn’t see any problem :

1. Do you mean when you click the navigation buttons or when you press the navigation buttons in keyboard ?

2. After enabled / disabled this parameter in back-end, did you check the result in front-end with full screen mode or normal mode ?</blockquote>

Hi Adam,
thanks for your answer :

first of all I’ve to precise I adopted the workaround recommended by your site to allow automatic scrolling of Slideshows. ( so no need any click to scroll )

1. when the slides are scrolling, the button link of the “slideshow content” works in “full Screen enabled mode ” only if browser is not full-screen on iMac 27-inch, meanwhile the navigation buttons (scroll forward – backward slide show) always are working fine.
When I’m resizing my browser window at the quarter of my screen , the “slideshow content buttons links” turning back to work.

2. I’ve checked in both mood :
When the module is set to full screen the ” slideshow content button links” stops working (but again, only on large screens, because on regular screens like macbook air – does not presents any kind of problem.)
If I disable the full screen mode , the ” slideshows content buttons links ” is working perfectly in any kind of resultion I’m watching the site ( fullscreen resolution too )

It seems to me( but I’m not a developer , of course ) that the ” slideshow content button links “, fails certain parameters when it is set in full screen enabled and the screen becomes too great, while remaining confined into these ( and therefore functions properly) when it is set in full screen disabled resolution screen (regardless of the size of the screen)

Thanks

[robcom Friend robcomJoin date: March 2013Posts: 9Downloads:8Uploads:0 Thanks: 3]

#575789

Last info for DEV Team :
If you set in the ACM “SldeShow” Style-1
“CONTENT POSITION ” and “TEXT ALIGNMENT ” to ” CENTER” the buttons are working.

[robcom Friend robcomJoin date: March 2013Posts: 9Downloads:8Uploads:0 Thanks: 3]

#642118

Last info for DEV Team :
If you set in the ACM “SldeShow” Style-1
“CONTENT POSITION ” and “TEXT ALIGNMENT ” to ” CENTER” the buttons are working.

[robcom Friend robcomJoin date: March 2013Posts: 9Downloads:8Uploads:0 Thanks: 3]

#740778

Last info for DEV Team :
If you set in the ACM “SldeShow” Style-1
“CONTENT POSITION ” and “TEXT ALIGNMENT ” to ” CENTER” the buttons are working.

[Adam M Moderator Adam MJoin date: May 2014Posts: 5159Downloads:33Uploads:66 Thanks: 95 Thanked: 1271 times in 1235 posts]

#575823

Hi @robcom,

Thanks for the detail, we appreciate that. I raised an issue so our development team can have a look at include the fix in next version, please stay tuned.

[Author]

Posts