Joomla Templates Club 406,261 posts

[salvi70 Friend salvi70Join date: August 2007Posts: 37Downloads:6Uploads:2 Thanks: 2 Thanked: 2 times in 1 posts]

#137838

Hi!

I’m trying to install JA Quartz like the demo but there is an error occuring I can’t find the solution.

I downloaded and installed Quickinstall 1.5.
Then I did what’s explained on the install-guide in this forum.

Everything is ok until it comes to the “highslide”-module.

When I open it (to configure it) the main menu in the backend disappears so that I can’t save, apply or do anything anymore.
And that’s it! The menu ist gone forever. Even if I close the window and try to log in again it doesn’t work because on the login-page I don’t see anything.. I can’t login anymore.

I installed whole joomla about 5 times today trying to find out what it can be.
I even installed a “void” joomla-version and the template, modules and plugins afterwards. But the same error occurs every time. As soon as I open the highslide-module it’s “the end”! Menu lost and joomla not workable anymore.

btw: the plugin was activated, of course.

So what can it be? Has anybody a similar or the same problem? Any solutions?

Thanks & Greetings!

[criticalkaos Friend criticalkaosJoin date: July 2008Posts: 49Downloads:0Uploads:0 Thanks: 7]

#289793

same problem here hope i can get this to work would look good on my site..

[salvi70 Friend salvi70Join date: August 2007Posts: 37Downloads:6Uploads:2 Thanks: 2 Thanked: 2 times in 1 posts]

#289878

@ admins

I have installed everything again now.
– joomla 1.5
– modules
– plugins

but I haven’t configured anything, so you can go and look at it in the backend.
(I sent you login/passw. with my first post).

–> http://www.fifa.becca.ch

thanks!

[salvi70 Friend salvi70Join date: August 2007Posts: 37Downloads:6Uploads:2 Thanks: 2 Thanked: 2 times in 1 posts]

#289938

to test i installed everything on joomla 1.0.15..
and it works!!

but as I want a 1.5.-joomla-version the question keeps be open.

[kansen Friend kansenJoin date: September 2008Posts: 86Downloads:0Uploads:25 Thanks: 8 Thanked: 12 times in 1 posts]

#290075

hi

i have almost the same problem, when i select type and try to save i got an error and cant save.

im using joomla 1.5.9

[kansen Friend kansenJoin date: September 2008Posts: 86Downloads:0Uploads:25 Thanks: 8 Thanked: 12 times in 1 posts]

#290081

i found the way to make the template works ok, and it is using the quickstart installation, in the same way it install joomla 1.5.9

recomended to all.

cheers and good luck 😉

[salvi70 Friend salvi70Join date: August 2007Posts: 37Downloads:6Uploads:2 Thanks: 2 Thanked: 2 times in 1 posts]

#290281

as you can read on my first post i installed the quickstart inst. about 3-4 times and still have the same problem.

[redserp Friend redserpJoin date: May 2009Posts: 51Downloads:0Uploads:3 Thanks: 24 Thanked: 7 times in 1 posts]

#304876

hi,
go to phpMyAdmin and make a repair tables in the corresponding database.
Worked for me!
regards
😉

1 user says Thank You to redserp for this useful post

1. bertdewolff

[bassfade Friend bassfadeJoin date: May 2008Posts: 11Downloads:0Uploads:0 Thanks: 3]

#306914

I have the same problem when I choose the type: slideshow controlbar or any other type I more do not succeed to save the module! I must leave in selec type in order seeing on the site the title it of the module

im using joomla 1.5.10

[bassfade Friend bassfadeJoin date: May 2008Posts: 11Downloads:0Uploads:0 Thanks: 3]

#307130

it is possible that nobody us aids? Nobody is successful to resolve the problem with joomla 1.5.10?

[bertdewolff Friend bertdewolffJoin date: February 2009Posts: 8Downloads:0Uploads:0 Thanks: 2]

#308097

<em>@salvi70 110180 wrote:</em><blockquote>Hi!

I’m trying to install JA Quartz like the demo but there is an error occuring I can’t find the solution.

I downloaded and installed Quickinstall 1.5.
Then I did what’s explained on the install-guide in this forum.

Everything is ok until it comes to the “highslide”-module.

When I open it (to configure it) the main menu in the backend disappears so that I can’t save, apply or do anything anymore.
And that’s it! The menu ist gone forever. Even if I close the window and try to log in again it doesn’t work because on the login-page I don’t see anything.. I can’t login anymore.

I installed whole joomla about 5 times today trying to find out what it can be.
I even installed a “void” joomla-version and the template, modules and plugins afterwards. But the same error occurs every time. As soon as I open the highslide-module it’s “the end”! Menu lost and joomla not workable anymore.

btw: the plugin was activated, of course.

So what can it be? Has anybody a similar or the same problem? Any solutions?

Thanks & Greetings!</blockquote>

same problem here, just clicking on the module in the backend is enough to make the backend menu disappear. need to do a re-install every time. Joomla Art are you listening ? don’t you think you owe the people here a solution ?

with me this problem occurs on a local server. This morning I tried it out on a remote server and editing ja highslide went without a hitch, no problem at all. So it might be the problem only occurs on local servers?

am using ff3, joomla 1.5.10, windows XP, Wamp

any ideas anyone ?

cheers
bert

[moosehead Friend mooseheadJoin date: December 2006Posts: 3Downloads:0Uploads:0]

#308261

Redserp – thanks for your tip. I had similar problem and the DB repair worked.

[bertdewolff Friend bertdewolffJoin date: February 2009Posts: 8Downloads:0Uploads:0 Thanks: 2]

#308262

<em>@bertdewolff 132947 wrote:</em><blockquote>same problem here, just clicking on the module in the backend is enough to make the backend menu disappear. need to do a re-install every time. Joomla Art are you listening ? don’t you think you owe the people here a solution ?

with me this problem occurs on a local server. This morning I tried it out on a remote server and editing ja highslide went without a hitch, no problem at all. So it might be the problem only occurs on local servers?

am using ff3, joomla 1.5.10, windows XP, Wamp

any ideas anyone ?

cheers
bert</blockquote>

the repair DB on local server did the trick for me too

thanks redserp for the tip and moosehead for bringing it up again

[redserp Friend redserpJoin date: May 2009Posts: 51Downloads:0Uploads:3 Thanks: 24 Thanked: 7 times in 1 posts]

#308378

Hi,

I`m glad I could help you guys! Can you press the thank you button on my post that helped you?
I have never been thanked :p

Thank you,

Keep it up

1 user says Thank You to redserp for this useful post

1. bassfade

[Author]

Posts