test
Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • cactusparis Friend
    #131017

    This is for Joomla 1.5 and before you ask me to send the URL, I’m on an intranet.
    I can’t publish my website until next month so I have plenty of time to test it.

    These are my gripes with this template, and from working with it I have learned that JoomlaArts are just taking snipets of code and modules from here and from there and repackaging them to their products, which is not bad at all, the problem is how they implement them and do not proof read their English, the instructions are way cryptic, and what should be explanations are mere descriptions:

    1 – JA Slideshow – does not work with Safari (mac OS X – does not animate)
    Why?: Because they didn’t test the template for MAC of course.

    2 – JA Slideshow – the screen png must be risized manually – WHY? (please don’t tell me to send you the URL, that has nothing to do with the way I installed it)
    Why?: Because they took this module from someone else and haven’t adapted it well to this template (some person in the forum suggested you re size the screen manually – And what the heck is “resire”???)

    3 – JA Tabs – modules are redundant, why tell it where to take the modules form if they are already published?
    Example – if I indicate JAtabs to take the modules form the left we would see the same modules on the left and on JA Tabs – there must be a better way to implement this!
    Most people will be ok with this by just typing code and not using it for the modules.
    Why?: Again this is a repackaged module.

    4 – JA Tabs – the Labra CSS folder was missing from the installation, I had to install it manually as someone proposed on another thread.
    Why?: someone forgot to include it.

    5 – JA Tabs – Is there a possibility to have an editor field (like TinyMCE) for the content? not all of us would like to type or paste code there <code></code>

    6 – JA Flowlist – It is absolutely NOT possible to have any other image in that flowlist if it’s not the last image from the article.
    Why? Sloppy adaptation.

    7 – JA Flowlist – Your images will not show up if you use any editor other than the default TinyMCE.

    Please try to understand my frustration as I didn’t get this template exactly free.
    Thank you

    Menalto Friend
    #260709

    1 – JA Slideshow – does not work with Safari (mac OS X – does not animate)
    Why?: Because they didn’t test the template for MAC of course.
    A: I tested this on safari for PC, but there also is a user here that tested on safari for mac, and no problem show up at that time.

    2 – JA Slideshow – the screen png must be risized manually – WHY? (please don’t tell me to send you the URL, that has nothing to do with the way I installed it)
    Why?: Because they took this module from someone else and haven’t adapted it well to this template (some person in the forum suggested you re size the screen manually – And what the heck is “resire”???)
    A: When you say screen png, which image are you talking about?
    3 – JA Tabs – modules are redundant, why tell it where to take the modules form if they are already published?
    Example – if I indicate JAtabs to take the modules form the left we would see the same modules on the left and on JA Tabs – there must be a better way to implement this!
    Most people will be ok with this by just typing code and not using it for the modules.
    Why?: Again this is a repackaged module.
    A: Somehow it should be so lets say you have have a module position in the template called “tabs”, and all modules you
    publish in the “tabs” position will show up in the tab module, instead of be needed to choose a module position to use.
    4 – JA Tabs – the Labra CSS folder was missing from the installation, I had to install it manually as someone proposed on another thread.
    Why?: someone forgot to include it.
    A: Not the first time.
    5 – JA Tabs – Is there a possibility to have an editor field (like TinyMCE) for the content? not all of us would like to type or paste code there <code></code>
    A: It should maybe be possible to get that, not sure though. I guess a request to the developers about this will give an answer.
    6 – JA Flowlist – It is absolutely NOT possible to have any other image in that flowlist if it’s not the last image from the article.
    Why? Sloppy adaptation.
    A: Not good at all.
    7 – JA Flowlist – Your images will not show up if you use any editor other than the default TinyMCE.
    A: Didnt test it out yet, so cant say yes or no to that.

    cactusparis Friend
    #260714

    hey menalto thanks for taking your time to reply man.

    On point No. 1.
    How do you get the navigation controls to show up? do they show up for you?

    On point No. 2.
    There is a screen png that acts as a mask for the module, it gives it rounded edges, should you decide to re size the module to put it in a different position the “screen” stays about 900 x 300 and then everything outside it remains square. (no rounded edges) this shouldn’t be done manually.

    On point No. 3.
    Fair enough but how do you get the modules only to show only in the tabs and not on both positions.

    Cheers.

    Menalto Friend
    #260717

    On point No. 1.
    How do you get the navigation controls to show up? do they show up for you?
    A: Hmmmmm,it did, but i have never had any success with get this navigation to work as it should

    On point No. 2.
    There is a screen png that acts as a mask for the module, it gives it rounded edges, should you decide to re size the module to put it in a different position the “screen” stays about 900 x 300 and then everything outside it remains square. (no rounded edges) this shouldn’t be done manually.

    A: Nope, This should have been done different, a little brainstorming and the solution would have been added by the dev’s at JA.
    On point No. 3.
    Fair enough but how do you get the modules only to show only in the tabs and not on both positions.

    A: Instead if have the module as it is now, i think i would have coded it to have ONE specific module position for use the tabs in, instead of have an option to choose many.
    But i dont know how the dev’s at JA have been thinking. This again put another question in my head”Can you use multiple modules of this module to show tabs in?”
    If so, then i would have coded so you used “tab1”, “tab2” and so on. Then you can put all modules you wanna show in tab1 in tab1 position.

    In your case, you NEED to find a module position that is not used before and put the modules in, i would choose cpanel, since JA templates never use cpanel module posiiton.
    Then you will avoid the modules to show up twice.

    cactusparis Friend
    #260722

    You have saved my arse in more ways than one with the cpanel option.
    You’ve been long enough here to know wether if the copypasters erm… developers could be made to solve the kinks out

    Thank you once again.

    mfcphil Friend
    #260733

    don’t start me off today with square edges on rounded modules…..baaahh

    hanhct Friend
    #262143

    <blockquote>
    6 – JA Flowlist – It is absolutely NOT possible to have any other image in that flowlist if it’s not the last image from the article.
    Why? Sloppy adaptation.
    </blockquote>
    Please use solution here:
    http://www.joomlart.com/forums/topic/setting-which-image-flowlist-use-from-the-article/
    <blockquote>
    7 – JA Flowlist – Your images will not show up if you use any editor other than the default TinyMCE.
    </blockquote>
    it not a bug of Flowlist module 🙂 It’s bug of FCK

    cactusparis Friend
    #262197

    Problem is I’m using JoomlaFCK brother, do they have a bug as well?

    Cheers

    hanhct Friend
    #262240

    Hi cactusparis!
    I have tried to use FCK editor and couldn’t re-produce the problem, Flowlist runs well, Please send admin account of your site via pm , i will check it for you.

    cactusparis Friend
    #262242

    Hello hanhct, thank you for the offer but the site is on an intranet for the moment it won’t go public until all the modules and content are setup

    On the other hand I do wish you could help me that way.

    Cheers.

    hanhct Friend
    #262264

    I’m really to help for you in my ability 🙂

Viewing 11 posts - 1 through 11 (of 11 total)

This topic contains 11 replies, has 4 voices, and was last updated by  hanhct 16 years, 5 months ago.

We moved to new unified forum. Please post all new support queries in our New Forum