Joomla Templates Club 406,261 posts

[XIE ZHIYUAN Friend XIE ZHIYUANJoin date: September 2014Posts: 17Downloads:0Uploads:3 Thanked: 1 times in 1 posts]

#170661

as shown in the attached pictures, there is a social link icons shown at the end of the article, how to do this? can’ find guidelines in the tuorial, thanks!

---

Attachments:

1. 

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#424469

Hi cndship

That is a K2 component function, must be enabled from K2 settings

[XIE ZHIYUAN Friend XIE ZHIYUANJoin date: September 2014Posts: 17Downloads:0Uploads:3 Thanked: 1 times in 1 posts]

#424478

thanks and I found that my configuration in the catagory option is the same as your demo’s, but why my website appearance is different from your demo’s? you can find the diffenence in the attached pictures.

---

Attachments:

1. 

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#424487

Could you send me your admin account details via Private message so i can take a look at your K2 component ?

and after i can explain to you the right settings

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#424576

Hi cndship

Thanks for your PM

I have checked your site and i think there was a misunderstanding

you are using the template Ja_Social 1.7 and K2 version 2.5.1 for joomla 1.7

The image you posted above is referred to the Ja_Social for Joomla 1.5

Joomlart templates before Ja_Tiris are not developed and tested ( and released ) for K2 component because them was released before the Joomla 1.7 stable version of the joomlaworks component..

Anyway this not means that you cannot use the K2 component on Joomlart templates like Ja_Social, but this is done at your own risk, because any malfunction or incompatibility between the two softwares cannot be attributed to the Joomlart template,

After this clarification i can say to you that the social icons field can be filled in k2 component management with your own code,

to do this go to Components–>K2 –> Parameters –>Social Tab and fill it with your code

[XIE ZHIYUAN Friend XIE ZHIYUANJoin date: September 2014Posts: 17Downloads:0Uploads:3 Thanked: 1 times in 1 posts]

#424581

thanks and even if I switch to Ja_Tiris, and choose the k2 template of tiris, the social sharing icons just disapear.

[XIE ZHIYUAN Friend XIE ZHIYUANJoin date: September 2014Posts: 17Downloads:0Uploads:3 Thanked: 1 times in 1 posts]

#424585

Ok, I figure out the problem for the k2 now, and another question is: why the social sharing link in the frontpage appears not to be in good order, there is large space from the content?

[sakul Friend sakulJoin date: September 2007Posts: 36Downloads:0Uploads:3 Thanks: 12 Thanked: 3 times in 1 posts]

#435967

could you share your experience with us, because i have the same problem with the social sharin buttons in ja tiris 1.7! i would be grateful! i have install via quickstart and first they were displayed. but when i change someting in the settings they dissapear!

[Author]

Posts