Joomla Templates Club 406,261 posts

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#695734

Reading you latest answer

<blockquote>My opnion:
It is a huge lack of joomla it can not filter by users or tags.</blockquote>

I wrongly understood that you opted for another solution to solve your problem, and i apologize for my error

out of this, i suggested in my first post to use the external component because i already tested it and it works fine on Teline V template, that is the template you were using when you opened this thread.

So if you want i can test now the external component on your ja magz II template and at the same time i will pass your request to the developer team if they can provide a solution to have JA Magz II template fully compatible with K2 component as you wish

I think these are the only possible solutions at your needs, temporary install the 3rd party component and use it until ( eventually ) a definitive new template release will be fully compatible with K2

If you want me to install and test component on your site then send me via Private Message a super user account to the website backend.

Best regards

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#750803

Reading you latest answer

<blockquote>My opnion:
It is a huge lack of joomla it can not filter by users or tags.</blockquote>

I wrongly understood that you opted for another solution to solve your problem, and i apologize for my error

out of this, i suggested in my first post to use the external component because i already tested it and it works fine on Teline V template, that is the template you were using when you opened this thread.

So if you want i can test now the external component on your ja magz II template and at the same time i will pass your request to the developer team if they can provide a solution to have JA Magz II template fully compatible with K2 component as you wish

I think these are the only possible solutions at your needs, temporary install the 3rd party component and use it until ( eventually ) a definitive new template release will be fully compatible with K2

If you want me to install and test component on your site then send me via Private Message a super user account to the website backend.

Best regards

[carlucci Friend carlucciJoin date: November 2006Posts: 509Downloads:195Uploads:108 Thanks: 172 Thanked: 17 times in 3 posts]

#695742

<em>@pavit 496008 wrote:</em><blockquote>Reading you latest answer

I wrongly understood that you opted for another solution to solve your problem, and i apologize for my error

out of this, i suggested in my first post to use the external component because i already tested it and it works fine on Teline V template, that is the template you were using when you opened this thread.

So if you want i can test now the external component on your ja magz II template and at the same time i will pass your request to the developer team if they can provide a solution to have JA Magz II template fully compatible with K2 component as you wish

I think these are the only possible solutions at your needs, temporary install the 3rd party component and use it until ( eventually ) a definitive new template release will be fully compatible with K2

If you want me to install and test component on your site then send me via Private Message a super user account to the website backend.

Best regards</blockquote>

I created an account. The data are at their particular site.

I would be very grateful if you could implement. I need a template magazine.

I started with TelineIII, then TelineiV en finally* TelineV.
TelineV I really like, but MagzII is more modern and I have decided on the latter.
TelineV is more complete, I left for the reason that you already know, thinking MagzII * not have the same lack.

It is not a whim what I want.
In my page written several authors and there are many label.
Therefore it is important to filter.

Note:
Your advising me, Teline or MagzII?

I send you a private message

link:
Teline : http://www.pino.punzi.es/
MagzII : http://demo.jamagzii.punzi.es/

[carlucci Friend carlucciJoin date: November 2006Posts: 509Downloads:195Uploads:108 Thanks: 172 Thanked: 17 times in 3 posts]

#750811

<em>@pavit 496008 wrote:</em><blockquote>Reading you latest answer

I wrongly understood that you opted for another solution to solve your problem, and i apologize for my error

out of this, i suggested in my first post to use the external component because i already tested it and it works fine on Teline V template, that is the template you were using when you opened this thread.

So if you want i can test now the external component on your ja magz II template and at the same time i will pass your request to the developer team if they can provide a solution to have JA Magz II template fully compatible with K2 component as you wish

I think these are the only possible solutions at your needs, temporary install the 3rd party component and use it until ( eventually ) a definitive new template release will be fully compatible with K2

If you want me to install and test component on your site then send me via Private Message a super user account to the website backend.

Best regards</blockquote>

I created an account. The data are at their particular site.

I would be very grateful if you could implement. I need a template magazine.

I started with TelineIII, then TelineiV en finally* TelineV.
TelineV I really like, but MagzII is more modern and I have decided on the latter.
TelineV is more complete, I left for the reason that you already know, thinking MagzII * not have the same lack.

It is not a whim what I want.
In my page written several authors and there are many label.
Therefore it is important to filter.

Note:
Your advising me, Teline or MagzII?

I send you a private message

link:
Teline : http://www.pino.punzi.es/
MagzII : http://demo.jamagzii.punzi.es/

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#696814

Hi

I configured K2 modules ( authors and tags ) on your JA Magz II website

Configured also component authorslist on your Teline V website sidebar-1 position as you can see it is working fine, you can customize it as you wish, tags module also positioned in the sidebar-1 position

check them

<blockquote>Your advising me, Teline or MagzII?</blockquote>

I prefer Teline V it is an awesome template

1 user says Thank You to pavit for this useful post

1. carlucci

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#750863

Hi

I configured K2 modules ( authors and tags ) on your JA Magz II website

Configured also component authorslist on your Teline V website sidebar-1 position as you can see it is working fine, you can customize it as you wish, tags module also positioned in the sidebar-1 position

check them

<blockquote>Your advising me, Teline or MagzII?</blockquote>

I prefer Teline V it is an awesome template

1 user says Thank You to pavit for this useful post

1. carlucci

[carlucci Friend carlucciJoin date: November 2006Posts: 509Downloads:195Uploads:108 Thanks: 172 Thanked: 17 times in 3 posts]

#696821

<em>@pavit 496082 wrote:</em><blockquote>Hi

I configured K2 modules ( authors and tags ) on your JA Magz II website

Configured also component authorslist on your Teline V website sidebar-1 position as you can see it is working fine, you can customize it as you wish, tags module also positioned in the sidebar-1 position

check them

I prefer Teline V it is an awesome template</blockquote>

Thank you very much for your help.

1. K2

Regarding K2, I know this component from Joomla -1.5. Therefore I have a lot of experience.
I have worked in check Beta versions.

Important would be integrated into MagzII. In this case we expect the development team is aware that K2 is very important.
There are many users of K2 and would increase the importance of MagzII and TelineV.

2. Author-list

I saw that my setup was fine. My mistake was think “Author-list” work by simply pressing the “User” located below the title,
as it is done in K2. The solution offered “Author-list” is currently sufficient.

Since Teline is an awesome template, as you’ve defined your sake, adding K2 in Teline, we could say that Teline It is optimal.
I just want to think that, Joomlart, note my suggestions.

3.- Fallo en TelineV

Teline failure pressing a Tag,
see the next line.

[PHP]Fatal error: Call to a member function get() on a non-object in /homepages/9/d444827561/htdocs/TelineV-1.0.6-pinopunzi/plugins/content/authorlist/authorlist_class.php on line 31[/PHP]

I just want to finish, congratulating you for a great work.
For me it was very important to make decisions.

Cheers

1 user says Thank You to carlucci for this useful post

1. pavit

[carlucci Friend carlucciJoin date: November 2006Posts: 509Downloads:195Uploads:108 Thanks: 172 Thanked: 17 times in 3 posts]

#750870

<em>@pavit 496082 wrote:</em><blockquote>Hi

I configured K2 modules ( authors and tags ) on your JA Magz II website

Configured also component authorslist on your Teline V website sidebar-1 position as you can see it is working fine, you can customize it as you wish, tags module also positioned in the sidebar-1 position

check them

I prefer Teline V it is an awesome template</blockquote>

Thank you very much for your help.

1. K2

Regarding K2, I know this component from Joomla -1.5. Therefore I have a lot of experience.
I have worked in check Beta versions.

Important would be integrated into MagzII. In this case we expect the development team is aware that K2 is very important.
There are many users of K2 and would increase the importance of MagzII and TelineV.

2. Author-list

I saw that my setup was fine. My mistake was think “Author-list” work by simply pressing the “User” located below the title,
as it is done in K2. The solution offered “Author-list” is currently sufficient.

Since Teline is an awesome template, as you’ve defined your sake, adding K2 in Teline, we could say that Teline It is optimal.
I just want to think that, Joomlart, note my suggestions.

3.- Fallo en TelineV

Teline failure pressing a Tag,
see the next line.

Fatal error: Call to a member function get() on a non-object in /homepages/9/d444827561/htdocs/TelineV-1.0.6-pinopunzi/plugins/content/authorlist/authorlist_class.php on line 31

I just want to finish, congratulating you for a great work.
For me it was very important to make decisions.

Cheers

1 user says Thank You to carlucci for this useful post

1. pavit

[melvine Friend melvineJoin date: August 2012Posts: 160Downloads:162Uploads:2 Thanks: 37 Thanked: 33 times in 9 posts]

#696845

Let me emphasize that I choose Teline V because K2 is not installed in That template. I don’t like K2 ?

So Indeed for me too Teline V is the perfect template.

Just for say Dear Team don’t integrate K2 in that template please (sorry Carlucci):((

Best Regards

Melvine

[melvine Friend melvineJoin date: August 2012Posts: 160Downloads:162Uploads:2 Thanks: 37 Thanked: 33 times in 9 posts]

#750894

Let me emphasize that I choose Teline V because K2 is not installed in That template. I don’t like K2 ?

So Indeed for me too Teline V is the perfect template.

Just for say Dear Team don’t integrate K2 in that template please (sorry Carlucci):((

Best Regards

Melvine

[carlucci Friend carlucciJoin date: November 2006Posts: 509Downloads:195Uploads:108 Thanks: 172 Thanked: 17 times in 3 posts]

#697282

<em>@melvine 496129 wrote:</em><blockquote>Let me emphasize that I choose Teline V because K2 is not installed in That template. I don?t like K2 ?

So Indeed for me too Teline V is the perfect template.

Just for say Dear Team don’t integrate K2 in that template please (sorry Carlucci):((

Best Regards

Melvine</blockquote>

Thanks for intervening in my post.
Your opinion is respectable, I do not discuss.

All Joomlart template *they have as a secondary option K2.
K2 is not essential for me.

I need to filter by users and tags and “all the powerful Joomla” is not able to.
One thing so simple that the “very modest K2” has solved very easy.

I love TelineV, but tell me how to solve the problem.
I can not understand that nobody needs filter.

Tell me, please, how to solve the following:

The “Author-list” component JoomlaHill not solve my need.
In addition fails with the tags.

In extreme cases I will settle “Author-list”.

[carlucci Friend carlucciJoin date: November 2006Posts: 509Downloads:195Uploads:108 Thanks: 172 Thanked: 17 times in 3 posts]

#750914

<em>@melvine 496129 wrote:</em><blockquote>Let me emphasize that I choose Teline V because K2 is not installed in That template. I don?t like K2 ?

So Indeed for me too Teline V is the perfect template.

Just for say Dear Team don’t integrate K2 in that template please (sorry Carlucci):((

Best Regards

Melvine</blockquote>

Thanks for intervening in my post.
Your opinion is respectable, I do not discuss.

All Joomlart template *they have as a secondary option K2.
K2 is not essential for me.

I need to filter by users and tags and “all the powerful Joomla” is not able to.
One thing so simple that the “very modest K2” has solved very easy.

I love TelineV, but tell me how to solve the problem.
I can not understand that nobody needs filter.

Tell me, please, how to solve the following:

The “Author-list” component JoomlaHill not solve my need.
In addition fails with the tags.

In extreme cases I will settle “Author-list”.

[melvine Friend melvineJoin date: August 2012Posts: 160Downloads:162Uploads:2 Thanks: 37 Thanked: 33 times in 9 posts]

#750982

Hi Carlucci ,

I try to install JoomlaHill, it works fine on my site. But I don’t really understand the functions. :laugh:

I am the only one who write on my site, so I don’t need this kind of extensions.

I want to help you if I can , but I never use K2.

What is the problem with the Tags, I don’t see on the picture, I went on your website for see, but it’s not the good template.

Is it something like that you are looking for ?

http://demo.quirkyfoxlabs.com/extn/#joo_articlesfilter

Best Regards
Melvine

[carlucci Friend carlucciJoin date: November 2006Posts: 509Downloads:195Uploads:108 Thanks: 172 Thanked: 17 times in 3 posts]

#751000

<em>@melvine 496270 wrote:</em><blockquote>Hi Carlucci ,

I try to install JoomlaHill, it works fine on my site. But I don?t really understand the functions. :laugh:

I am the only one who write on my site, so I don?t need this kind of extensions.

I want to help you if I can , but I never use K2.

What is the problem with the Tags, I don?t see on the picture, I went on your website for see, but it?s not the good template.

Is it something like that you are looking for ?

http://demo.quirkyfoxlabs.com/extn/#joo_articlesfilter

Best Regards
Melvine</blockquote>

Hi Malvine!

Joomla Hill works. Maybe I have explained wrong. Tags do not work:
see:
Fatal error: Call to a member function get() on a non-object in /homepages/9/d444827561/htdocs/TelineV-1.0.6-pinopunzi/plugins/content/authorlist/authorlist_class.php on line 31

Thank you to lend help.

Respect K2 I do not need help. I have a lot of experience.
The component that advises me is pricier than 12 template of Joomlart.
It’s not what I want.

Joomlart should incorporate K2 as it has always done.

K2 is optional, if you want installed it, and if not ignore it.

Joomlart, only should incorporate k2 and TelineV modules and Ja-MagzII are compatible with or without K2.
The user decides!

In addition, K2 is completely free and with forums in several languages as Spanish, Italian etc.

If you will refuse to k2 simply do not install, as simple as that.

—————————————

TelineV has a very long load pressing the menu item Magazine or Home.

I think is why many images load. I have disabled the envents and videos of Home menu.

Can you tell me anything about it?

ja MagzII It has a good charge.

Link: http://www.pino.punzi.es/

Regards

[melvine Friend melvineJoin date: August 2012Posts: 160Downloads:162Uploads:2 Thanks: 37 Thanked: 33 times in 9 posts]

#751007

Your website are not slow, more faster than mine and i’m working on localhost.

I don’t understand why you have this fatal error with TAG, I have not this problem . Did you start with the Quickstart package ?
I tried to replicate your Fatal error but I can’t ( I ‘m not a pro by the way).

Did you enter the author by the ID ? Did you check the author tag ?

Have you read this : http://www.joomlahill.com/forum/author-list/59-plugin-conflict-with-joomla-3-tags

Have you Sh404SEF or else ?

Regards Melvine

1 user says Thank You to melvine for this useful post

1. carlucci

[Author]

Posts