test
Viewing 13 posts - 16 through 28 (of 28 total)
  • Author
    Posts
  • jantunes Friend
    #443951

    I told you on the second PM that the JA News was published on the frontpage again.You changed it placing three articles on the left side moving slideshow… and did you check the links for the article?. It is always going to the last one. That is the problem

    See the image. The tooltip show a different link from the article that is on show.

    The problem with JA News Pro is shown on the second image. Now I need a div to get a module inserted between two JA News Pro.

    RSS feed: I only have RSS feed because I’ve published the links component part for the page, because if I don’t I can not feed my Twitter and FaceBook pages. But before and by design of Teline, you did not need to use the component from the first page, and the RTS feed would work. As I wrote to you I need to have the site working and feeding news outside or I will loose visits. I’ve checked all these with all browsers and it’s not working – I’ve said this lots of time by now. I know how Teline was wroking and I can see it’s not working the same now, so something must be wrong. And I am always afraid because JA has already messed up my website and could not find any solution. So, what shall we do next?


    1. problems-JANewsFeatured
    2. problems-JANewsPro
    Blaine Friend
    #444019

    Please do not become ugly towards me.
    If you read my posts you will see I have asked a lead DEV to step in and assist you.
    Please be polite. We are trying to help you as best as we can.

    jantunes Friend
    #444034

    Hi Blaine

    I am not being unpolite. What I said is true… JA has messed up my website, and I’ve had various problems during these years and in the end I was right… always. I am just tired of people always stating that they don’t see anything wrong when it’s so obvious.And I’ve been telling this over and over and no one seems to see it. It’s hard to pass the message through. But in the end I’ve been a Joomlart client since 2008, so I must believe they do a good job. Most of the time…

    I am quite familiar with Joomla and Teline, so I know what was working and is not working now. And as I try to keep the extra modules to a minimum, so I don’t have problems, I am aware when something has changed even if I did not introduce new things. And because writing and photographing are my main occupations – and not making websites – I need to have Teline working fine on this website so I can keep doing my thing. I just need people to do their part and see when there are problems. I guess I am not asking much, also because solving this will probably help a lot of other people…

    JA

    Blaine Friend
    #444089

    I am asking another mod to step in, his name is Manos

    Manos Moderator
    #444221

    Hello jantunes,

    Can you please let me know if you have any kind of customization to JA News Pro module ? and if not please let me know if i have your permission to uninstall the module and install it again (you may do this also if you want to by your self )

    I am waiting for your reply.

    Regards

    Manos Moderator
    #444760

    Hello jantunes please let me know if you managed to solve this issue

    Denise Civiletti Friend
    #457886

    Has this issue ever been resolved? I’m having the same problem with my website – the links on JA News Featured all point to the same article (the last on the slider).

    jantunes Friend
    #457888

    Not that I am aware of. I even gave the admin access to JA twice, but they could not SEE the problem… So I simply gave up… If they can not see it maybe it does not exist… :-[

    jantunes Friend
    #457889

    Hi

    I have not been looking at this lately, just got a message now. I’ve reinstalled the module and all, the problem is still, there. I’ve no customization, it’s the plain module as it comes. It was working fine and then suddenly it stopped. I’ve done everything as it should be done and it does not work. I’ve given up having the slideshow running, just a single news article (the latest). JA admins were in but did not SEE the problem…

    Manos Moderator
    #458954

    Hello,

    Please uninstall completely the module and install it again! I asked your permission to download your website local (backup) so i can check this further but since you didn’t reply my hands were tied.

    Since then i faced this problem on an other site and i found out that some times ( i wasn’t able to clarify what’s causing this) during the update not all files get updated. Uninstall and Reinstall the module with a fresh downloaded file solves the problem! So please give it a try!

    Regards
    Manos

    jantunes Friend
    #458955

    Hi

    I’ve done that twice and the problem is still there. I’ve given up, in fact, but I’ll check again, maybe something has changed in a new update of the module. Thanks

    JA

    jantunes Friend
    #460033

    I’ve had a bit of time to change the module, it works, now… but for some reason now it does not display the first image from the article (before the READMORE bar) but the first after the jump. Any idea why as I did not change anything else? When you open the whole article an in the section you’ve the initial pic, but on the module ti shows the second…

    Stork11 Friend
    #460219

    <em>@jantunes 328859 wrote:</em><blockquote>I’ve had a bit of time to change the module, it works, now… but for some reason now it does not display the first image from the article (before the READMORE bar) but the first after the jump. Any idea why as I did not change anything else? When you open the whole article an in the section you’ve the initial pic, but on the module ti shows the second…</blockquote>
    Hello jantunes,

    Can you PM me with your site information (your site URL, your site admin account) and your FTP account? So I can diagnose this problem.

    BTW, please include this forum thread URL in your PM, so I can follow it.

    Best regards.

Viewing 13 posts - 16 through 28 (of 28 total)

This topic contains 28 replies, has 7 voices, and was last updated by  Stork11 12 years, 5 months ago.

We moved to new unified forum. Please post all new support queries in our New Forum