Joomla Templates Club 406,261 posts

[ccsorensen Friend ccsorensenJoin date: December 2012Posts: 2Downloads:0Uploads:0]

#183180

When I create a new article within the category that the JA News Pro module is displaying, it’s not displayed until I go into the administrator section of my site, open the JA New Pro module and then save and close it. Only then will it start displaying the new article I created. Is this by design? :((

[Ninja Lead Moderator Ninja LeadJoin date: November 2014Posts: 16064Downloads:310Uploads:2864 Thanks: 341 Thanked: 3854 times in 3563 posts]

#476784

I’m not quite sure what modifications you have done upon your installation, would need to take a closer look at your site. Please include screenshot and your site URL(or just send PM me with the login details). I shall help you out.

[mesasel Friend mesaselJoin date: November 2012Posts: 37Downloads:0Uploads:22 Thanks: 22 Thanked: 7 times in 1 posts]

#476959

Can you please give us explanation when you solve this problem, because I have same problem with my site. I will follow this threat to find out solution. Maybe cache is a problem or something? :confused:

[ccsorensen Friend ccsorensenJoin date: December 2012Posts: 2Downloads:0Uploads:0]

#476964

Ninja Lead, I sent you a PM with login credentials.

[Ninja Lead Moderator Ninja LeadJoin date: November 2014Posts: 16064Downloads:310Uploads:2864 Thanks: 341 Thanked: 3854 times in 3563 posts]

#477017

@mesasel and @ccsorensen: this is not bug because you are enabled cache module and you need to clear cache when you add new artile or you can disable cache on module, see the screenshot

and set it to no caching

@ccsorensen: i have disabled it on your site. please check it again
@mesasel: you can applied this my fixes with your site.

Let me know if it helps

---

Attachments:

1. 

[iraqtech Friend iraqtechJoin date: February 2011Posts: 24Downloads:0Uploads:0 Thanks: 4 Thanked: 9 times in 1 posts]

#477095

Try this
Go to Template Manager > JA Teline IV > Global > System Settings.
Set the: Enable Development Mode to Yes.
Save and try.
Let me know if this helps.

[Author]

Posts