Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • bridgecom Friend
    #128274

    Hi,
    I have installed teline II over the top of teline I (which I still like) and published some modules in user6 as required by the instructions but they are not displaying? Can’t think what I have done wrong. Any help would be appreciated. Thanks.

    VisiGod Friend
    #247997

    Most probably, your modules have class suffixes in the parameters. In this way, sometimes they didnt show.

    bridgecom Friend
    #247999

    <em>@VisiGod 52034 wrote:</em><blockquote>Most probably, your modules have class suffixes in the parameters. In this way, sometimes they didnt show.</blockquote>
    I have had a look at the suffixes – but the suffix fields are blank. Any other thoughts?

    VisiGod Friend
    #248005

    Hmz, could you try unpublishing these modules and try to publish them one by one. I had some similar issues, since one of the custom modules was breaking the whole tabs layot and nothing was shown.

    bridgecom Friend
    #248007

    <em>@VisiGod 52043 wrote:</em><blockquote>Hmz, could you try unpublishing these modules and try to publish them one by one. I had some similar issues, since one of the custom modules was breaking the whole tabs layot and nothing was shown.</blockquote>
    Na. Tried that didna work! Thanks for looking at the prob.

    producer111 Friend
    #248413

    For User 6, it is obligatory to have “show title” (of the module) turned “ON”. It’s written in the user guide.

    bridgecom Friend
    #248494

    I am aware of the fact that the title should be on – they are all on. Any other thoughts?

Viewing 7 posts - 1 through 7 (of 7 total)

This topic contains 7 replies, has 3 voices, and was last updated by  bridgecom 16 years, 6 months ago.

We moved to new unified forum. Please post all new support queries in our New Forum