Performance issues!!!!

Forums    Joomla Templates Club    JA Wall    Performance issues!!!!
Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • Author
    Posts
  • gjrweb Friend
    June 14, 2012 at 3:40 pm #178164

    We have some huge performance issues on JA Wall, please check http://www.airsoftwall.com/

    We tested our website on GTmetrix, please see our results here: http://gtmetrix.com/reports/www.airsoftwall.com/z4ZAWlaF

    Summarized:

    Page Speed Grade: E (52%)
    YSlow Grade: D (65%)

    Page load time: 28.69s
    Total page size: 13.9MB
    Total number of requests: 477

    What to do to improve this? We already optimized our htaccess with the master htaccess >> http://magazine.joomla.org/issues/Issue-June-2012/item/787-htaccess-File-That-FREAKIN-Works

    Would is be usefull to replace the pseudo cron with a server side cron?

    Any advice is welcome!

    Wall Crasher Developer
    June 15, 2012 at 7:43 am #457513

    Hi gjrweb,

    It it really hard to archive a good page load performance when you load a ton of content on initial page.
    You can set the number of article load on home page. JA Wall has infinity-scroll function. When user scroll down, the page will load other item. It will make the page load faster.

    To specify the number of item load, please follow this step.
    1. Open home menu item in edit mode
    2. Expand Blog Layout Options section on the right
    3. Set the number of item here

    # Leading Articles 0
    # Intro Articles 20
    # Columns 1
    # Links 0

    This setting will force your site load 20 articles only when the page load.

    Hope it helps.

    Regards

    1 user says Thank You to Wall Crasher for this useful post

    1. gjrweb
    gjrweb Friend
    June 18, 2012 at 10:54 am #457832

    Works better indeed, now the laze load also works properly.

    In the sample data we used those category blog layout options were empty.

    Please keep an eye on performance 😉

    wombat1 Friend
    June 24, 2012 at 4:37 pm #458640

    Just in case it helps anyone, pseudo cron made my site almost unusable, users had to reload each page twice. First time loads showed blank pages.

    <blockquote>

    Would is be usefull to replace the pseudo cron with a server side cron?

    Any advice is welcome!</blockquote>

    1 user says Thank You to wombat1 for this useful post

    1. modum
    Wall Crasher Developer
    June 25, 2012 at 2:11 am #458655

    Hi wombat1,

    It would be better if you try to optimize the JA Social Feed plugin.
    Please delete (if possible) or disable all profiles which you are not using.
    Also please increase the interval time up to 3600 (1 hours) or even 7200 (2 hours) based on your social feed update frequency.

    Hope it helps.

    Regards

    Mike Friend
    June 26, 2012 at 11:27 pm #458958

    <em>@wombat1 326991 wrote:</em><blockquote>Just in case it helps anyone, pseudo cron made my site almost unusable, users had to reload each page twice. First time loads showed blank pages.</blockquote>

    How can you change this to server side cron? I am getting blank pages also.

    Regards
    Mike

    Wall Crasher Developer
    June 27, 2012 at 1:19 am #458963

    Hi aussiemike,

    JA Social Feed Plugin let you change the interval from setting page.
    1. Open Plugin Managers -> System – JA Social Feed
    2. Active General tab
    3. Set Cron Interval value.

    Save

    Hope it helps.

    Regards

    Mike Friend
    June 27, 2012 at 7:15 pm #459105

    Hi Wallcrasher
    Thanks for that. I was aware of that being there. I got the impression from the above post that it was better to set up a cronjob in the CPANEL of my hosting (pseudo cron?). I must have misunderstood.

    I am using K2 Categories for my front page. I keep getting blank pages. I reset my CRON to run every hour but the blank page still occurs. It is intermittent but is still annoying. It also happens sometimes when a registered user goes to their K2 page. I have not launched the site yet and would like to get these few things sorted out first.

    Any advice appreciated,

    Mike Friend
    June 27, 2012 at 11:04 pm #459116

    I seem to have fixed it. I had too many K2 items loading on the front page. Sorry to bother.

    <em>@aussiemike 327603 wrote:</em><blockquote>Hi Wallcrasher
    Thanks for that. I was aware of that being there. I got the impression from the above post that it was better to set up a cronjob in the CPANEL of my hosting (pseudo cron?). I must have misunderstood.

    I am using K2 Categories for my front page. I keep getting blank pages. I reset my CRON to run every hour but the blank page still occurs. It is intermittent but is still annoying. It also happens sometimes when a registered user goes to their K2 page. I have not launched the site yet and would like to get these few things sorted out first.

    Any advice appreciated,</blockquote>

    Wall Crasher Developer
    June 28, 2012 at 1:28 am #459119

    Hi aussiemike,

    It is very good that you have solved your problem. 😉
    Try to build a good wall. Gook luck!

    Regards

    wombat1 Friend
    June 28, 2012 at 6:30 pm #459218

    Just to clarify my post. Yes. In our case if we activated the pseudo-cron plugin the site would give errors and blank pages, however when we turned this off everything was back to normal. We did play around with the settings but any which way we tried was causing blank pages. I am going to see if reducing the number of K2 items helps. Thanks for that.

    <em>@aussiemike 327603 wrote:</em><blockquote>Hi Wallcrasher
    Thanks for that. I was aware of that being there. I got the impression from the above post that it was better to set up a cronjob in the CPANEL of my hosting (pseudo cron?). I must have misunderstood.

    I am using K2 Categories for my front page. I keep getting blank pages. I reset my CRON to run every hour but the blank page still occurs. It is intermittent but is still annoying. It also happens sometimes when a registered user goes to their K2 page. I have not launched the site yet and would like to get these few things sorted out first.

    Any advice appreciated,</blockquote>

    Mike Friend
    June 29, 2012 at 6:48 am #459268

    Did that help you? Just wanted to be sure that I went the right way with that one.

    <em>@wombat1 327770 wrote:</em><blockquote>Just to clarify my post. Yes. In our case if we activated the pseudo-cron plugin the site would give errors and blank pages, however when we turned this off everything was back to normal. We did play around with the settings but any which way we tried was causing blank pages. I am going to see if reducing the number of K2 items helps. Thanks for that.</blockquote>

    Wall Crasher Developer
    June 29, 2012 at 9:39 am #459303

    Hi wombat1,

    How about your problem status?
    Please send me your site information (link, admin, ftp) so I can take a look.

    Regards

    Mike Friend
    July 1, 2012 at 10:36 pm #459445

    I am still getting blank pages. If I go to a page after not viewing for a while it comes up blank. Refreshing the page then shows the items. This happens even when there are only two articles on the page that are not coming from the social feed plugin.

    Any advice?

    Regards
    Mike

    Wall Crasher Developer
    July 3, 2012 at 1:23 am #459623

    Hi Mike,

    It is really hard to troubleshoot your problem without information.
    Please pm me your access information (admin/ftp) so I can take a look.

    Please try to stop all cron job and try a to see the problem still there or not.

    Regards

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 17 total)
1 2

This topic contains 17 replies, has 5 voices, and was last updated by  Wall Crasher 12 years, 2 months ago.

We moved to new unified forum. Please post all new support queries in our New Forum

Important Notice :

New Unified Portal is live

Must Read

Jump to forum

Categories