Joomla Templates Club 406,261 posts

[mkfloresca Friend mkflorescaJoin date: November 2014Posts: 57Downloads:11Uploads:15 Thanks: 16]

#207850

Hello,

Has any of you used an extension called sigplus? It had a high score in the JED. I was looking for a simple gallery and thought this was a good one based on the demo. However, after installing, it screwed up my JA Slide Show Lite setup.

I had to disable the JA slideshow I have in my original site setup because I was getting a blank white page on my homepage – no content at all. Thank goodness it was the only reason (I hope). After disabling the JA Slideshow, I now have functioning page again.

I thought I should just reinstall JA Slideshow (I already uninstalled that sigplus!!!). But before I do, is there any other solution to this? LIke maybe just tweaking a few files?

Any help or thoughts?

Thanks,
Karla

[Saguaros Moderator SaguarosJoin date: September 2014Posts: 31405Downloads:237Uploads:471 Thanks: 845 Thanked: 5346 times in 4964 posts]

#575558

Hi Karla,

Not sure which version of JA University that you’re using: University JAT3 v2 framework or University T3 framework (new one)?

Anyways, when you face issue with white page, try to enable the ‘Error Reporting’ option in Global configuration in back-end of your site. It will report error message in detail and you will know where it comes from.

Regards,
Saguaros

[Saguaros Moderator SaguarosJoin date: September 2014Posts: 31405Downloads:237Uploads:471 Thanks: 845 Thanked: 5346 times in 4964 posts]

#641888

Hi Karla,

Not sure which version of JA University that you’re using: University JAT3 v2 framework or University T3 framework (new one)?

Anyways, when you face issue with white page, try to enable the ‘Error Reporting’ option in Global configuration in back-end of your site. It will report error message in detail and you will know where it comes from.

Regards,
Saguaros

[Saguaros Moderator SaguarosJoin date: September 2014Posts: 31405Downloads:237Uploads:471 Thanks: 845 Thanked: 5346 times in 4964 posts]

#740549

Hi Karla,

Not sure which version of JA University that you’re using: University JAT3 v2 framework or University T3 framework (new one)?

Anyways, when you face issue with white page, try to enable the ‘Error Reporting’ option in Global configuration in back-end of your site. It will report error message in detail and you will know where it comes from.

Regards,
Saguaros

[mkfloresca Friend mkflorescaJoin date: November 2014Posts: 57Downloads:11Uploads:15 Thanks: 16]

#575565

<em>@Saguaros 480151 wrote:</em><blockquote>Hi Karla,

Not sure which version of JA University that you’re using: University JAT3 v2 framework or University T3 framework (new one)?

Anyways, when you face issue with white page, try to enable the ‘Error Reporting’ option in Global configuration in back-end of your site. It will report error message in detail and you will know where it comes from.

Regards,
Saguaros</blockquote>

Hi Saguaros,

Framework Information
T3 Framework
Version:2.4.0

Template Information
Ja University T3
Version:1.1.2

Before installing “Sigplus” for photo gallery, everything is working great, including the JA Slideshow Lite module I have customized. After the installation, and failed attempts to make sigplus work, I uninstalled it. Then, the white page came up. I did turn on the error/debugging on my config file and here are the errors I got below. That’s the reason I know that it affected my installation of JA Slideshow Lite. When I disabled the slideshow, the site came up normally.

From these, can I actually salvage my original JA Slideshow Lite setup or do I have to reinstall it?
Any help or thoughts?

Thanks,
Karla

---

Attachments:

1. 
2. 

[mkfloresca Friend mkflorescaJoin date: November 2014Posts: 57Downloads:11Uploads:15 Thanks: 16]

#641895

<em>@Saguaros 480151 wrote:</em><blockquote>Hi Karla,

Not sure which version of JA University that you’re using: University JAT3 v2 framework or University T3 framework (new one)?

Anyways, when you face issue with white page, try to enable the ‘Error Reporting’ option in Global configuration in back-end of your site. It will report error message in detail and you will know where it comes from.

Regards,
Saguaros</blockquote>

Hi Saguaros,

Framework Information
T3 Framework
Version:2.4.0

Template Information
Ja University T3
Version:1.1.2

Before installing “Sigplus” for photo gallery, everything is working great, including the JA Slideshow Lite module I have customized. After the installation, and failed attempts to make sigplus work, I uninstalled it. Then, the white page came up. I did turn on the error/debugging on my config file and here are the errors I got below. That’s the reason I know that it affected my installation of JA Slideshow Lite. When I disabled the slideshow, the site came up normally.

From these, can I actually salvage my original JA Slideshow Lite setup or do I have to reinstall it?
Any help or thoughts?

Thanks,
Karla

[mkfloresca Friend mkflorescaJoin date: November 2014Posts: 57Downloads:11Uploads:15 Thanks: 16]

#740556

<em>@Saguaros 480151 wrote:</em><blockquote>Hi Karla,

Not sure which version of JA University that you’re using: University JAT3 v2 framework or University T3 framework (new one)?

Anyways, when you face issue with white page, try to enable the ‘Error Reporting’ option in Global configuration in back-end of your site. It will report error message in detail and you will know where it comes from.

Regards,
Saguaros</blockquote>

Hi Saguaros,

Framework Information
T3 Framework
Version:2.4.0

Template Information
Ja University T3
Version:1.1.2

Before installing “Sigplus” for photo gallery, everything is working great, including the JA Slideshow Lite module I have customized. After the installation, and failed attempts to make sigplus work, I uninstalled it. Then, the white page came up. I did turn on the error/debugging on my config file and here are the errors I got below. That’s the reason I know that it affected my installation of JA Slideshow Lite. When I disabled the slideshow, the site came up normally.

From these, can I actually salvage my original JA Slideshow Lite setup or do I have to reinstall it?
Any help or thoughts?

Thanks,
Karla

[Saguaros Moderator SaguarosJoin date: September 2014Posts: 31405Downloads:237Uploads:471 Thanks: 845 Thanked: 5346 times in 4964 posts]

#575569

This kind of error due to the missing library – GD library. You should contact your hosting provider for help to install this library for you.

The same topic was discussed here: http://www.joomlart.com/forums/topic/ja-university-front-end-does-not-appear-warning-call_user_funcimagecreatefromjpeg/#post-468475

[Saguaros Moderator SaguarosJoin date: September 2014Posts: 31405Downloads:237Uploads:471 Thanks: 845 Thanked: 5346 times in 4964 posts]

#641899

This kind of error due to the missing library – GD library. You should contact your hosting provider for help to install this library for you.

The same topic was discussed here: http://www.joomlart.com/forums/topic/ja-university-front-end-does-not-appear-warning-call_user_funcimagecreatefromjpeg/#post-468475

[Saguaros Moderator SaguarosJoin date: September 2014Posts: 31405Downloads:237Uploads:471 Thanks: 845 Thanked: 5346 times in 4964 posts]

#740560

This kind of error due to the missing library – GD library. You should contact your hosting provider for help to install this library for you.

The same topic was discussed here: http://id.joomlart.com/forums/topic/ja-university-front-end-does-not-appear-warning-call_user_funcimagecreatefromjpeg/#post-468475

[mkfloresca Friend mkflorescaJoin date: November 2014Posts: 57Downloads:11Uploads:15 Thanks: 16]

#575575

<em>@Saguaros 480163 wrote:</em><blockquote>This kind of error due to the missing library – GD library. You should contact your hosting provider for help to install this library for you.

The same topic was discussed here: http://www.joomlart.com/forums/topic/ja-university-front-end-does-not-appear-warning-call_user_funcimagecreatefromjpeg/#post-468475</blockquote>

Hi,

Fortunately on the live host still works with the slideshow.

My local site has been screwed up though.
Thanks and will see if I can fix the local host with the GD library.

[mkfloresca Friend mkflorescaJoin date: November 2014Posts: 57Downloads:11Uploads:15 Thanks: 16]

#641905

<em>@Saguaros 480163 wrote:</em><blockquote>This kind of error due to the missing library – GD library. You should contact your hosting provider for help to install this library for you.

The same topic was discussed here: http://www.joomlart.com/forums/topic/ja-university-front-end-does-not-appear-warning-call_user_funcimagecreatefromjpeg/#post-468475</blockquote>

Hi,

Fortunately on the live host still works with the slideshow.

My local site has been screwed up though.
Thanks and will see if I can fix the local host with the GD library.

[mkfloresca Friend mkflorescaJoin date: November 2014Posts: 57Downloads:11Uploads:15 Thanks: 16]

#740566

<em>@Saguaros 480163 wrote:</em><blockquote>This kind of error due to the missing library – GD library. You should contact your hosting provider for help to install this library for you.

The same topic was discussed here: http://id.joomlart.com/forums/topic/ja-university-front-end-does-not-appear-warning-call_user_funcimagecreatefromjpeg/#post-468475</blockquote>

Hi,

Fortunately on the live host still works with the slideshow.

My local site has been screwed up though.
Thanks and will see if I can fix the local host with the GD library.

[Author]

Posts