test
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • sunrise Friend
    #136108

    Can anyone help me? On my site http://www.jonas-christy.com, on the front page I use ja-highslide. It displays 9 thumbnails. This works fine in IE and FF, but in opera, instead of displaying them 3×3, in three colums, there are only 2 columns. Does anyone know what the solutions could be. I imagine that making the thumbnails smaller would help. But because the thumbnails are not centered it woulod leave a bigger gap/margin on the right in IE or FF.

    Hope someone has the answer to this.

    Sherlock Friend
    #282103

    Hi sunrise !

    Please send admin account via pm , i need it to check html code of highslide module.

    sunrise Friend
    #282107

    Hello hainn84,
    I sent the info you requested. Let me know if for some reason you don’t get it.

    Sherlock Friend
    #282511

    Hi sunrise !

    Please check , it is ok now , I have fixed it following way below :
    – Go to admin >> extensions >> module manager >> select Photoshoot Pictures module
    – On right panel , in Advanced Parameters tab, you set for height and width to “41”.

    sunrise Friend
    #282877

    Thanks a lot hainn84 for taking the time to look at this. What you did solved the problem for Opera, but it also makes the thumbnails smaller in FF and IE, and then it does not look so good there. I notice that in Opera, the gap between right and the main part is larger than between left and right. Not so in FF or IE so maybe there is something in Opera that interprets the code different? Anyway, thanks again for trying, but Imay go back to the original 46×46 that I had before.

Viewing 5 posts - 1 through 5 (of 5 total)

This topic contains 5 replies, has 2 voices, and was last updated by  sunrise 16 years ago.

We moved to new unified forum. Please post all new support queries in our New Forum