Viewing 15 posts - 1 through 15 (of 29 total)
  • Author
    Posts
  • Hung Dinh Friend
    #149377

    Changelog for Teline III V 1.4.1

    1.4.1 ( 02/Mar/10 | Release Notes)
    Update T3 framework and support RTL layout

    JATCTELINEIII-209 FIXED CSS error on registration form
    JATCTELINEIII-212 FIXED Layout = mobile: has a bug
    JATCTELINEIII-208 FIXED Menu type
    JATCTELINEIII-211 FIXED RTL language support
    JATCTELINEIII-210 FIXED Update to Latest T3 framework


    T3 framework has been updated to all the T3 based templates. Please read the Announcement HERE.

    Hung Dinh

    VisiGod Friend
    #335624

    and what are the actual code changes and files affected?

    Arvind Chauhan Moderator
    #335639

    Dear VisiGod,

    It would be difficult to say that at this moment. Its the framework update. However, chances are bright that with the release of new download / versioning system, it might be possible to pin out the changed files. But as on today, you will have to use 3rd party softwares such as WinMerge to compare the two versions to find out the changed files.

    regards

    Arvind

    deblock Friend
    #335841

    My apologies for such a basic question, but I’m not sure where to download the updated version and how to install it. Can anyone help?

    gray Friend
    #335845

    Template could be downloaded from here.

    Updating could be done through full re-install of the template (keep back-ups of hacked files, if any), or by uplading only changed files (in this case comparsion of files with your current version of template is required).

    stinger2010 Friend
    #336107

    Excuse me, can you provide to us only modificated files from last update, because i have made change in more then 30 files in Ja Teline III. If I reinstall Ja Teline III, it will take much time to compare and make same modification. Maybe, i can’t do same modification, because its very difficulty.

    gray Friend
    #336216

    So, I took the comparison software and found the below files are different between v.1.4.0 and 1.4.1. Please note that I skipped files were only commented lines were changed (liked new version number at the top etc.)

    Hope it helps.

    ——————————————–
    Mode: Right Newer and Right Orphans
    Left base folder: VERSION 140
    Right base folder: VERSION 141

    Right Orphan Files (NEW in 141)
    ——————————————–
    csshandheldiphone_rtl.css
    csshandheldtemplate_rtl.css
    cssie-rtl.css
    csstemplate_rtl.css
    elementgrad.png
    elementjaparamhelper.css
    elementjaparamhelper.js
    elementjaparamhelper.php
    imagest3-logo.gif
    jsja.rightcol.js
    ——————————————–

    Right Newer Files (UPDATED in 141)
    ——————————————–
    adminen-GB.tpl_ja_teline_iii.ini
    csshandheldtemplate.css
    csstemplate.css
    jsmenumega.js
    jsiphone.js
    jsja.script.js
    layoutsblockshandheldhead.php
    layoutsblocksiphonehead.php
    layoutsblocksiphonemainnav.php
    layoutsblocksfooter.php
    layoutsblockshead.php
    libsmenubase.class.php
    libsmenumega.class.php
    libsja.template.helper.php
    libsmobile_device_detect.php
    index.php
    templateDetails.xml
    ——————————————–

    bvrobert Friend
    #336422

    I have instaled jateline 3 vers 1.4.0 on my website http://www.ascrid.org; now appear this 1.4.1 how can i update my older one without to overwrite by mistake my work in the site?I need just updates to be installed but i don’t know what files i should update,please avice!

    gray Friend
    #336435

    <em>@bvrobert 169697 wrote:</em><blockquote>I have instaled jateline 3 vers 1.4.0 on my website http://www.ascrid.org; now appear this 1.4.1 how can i update my older one without to overwrite by mistake my work in the site?I need just updates to be installed but i don’t know what files i should update,please avice!</blockquote>

    See my message above. I listed UPDATED and NEW files in 1.4.1 compared with 1.4.0.

    gray Friend
    #336930

    I compared also exentions which goes with v 1.4.1 and 1.4

    NEW in 1.4.1
    —————————————————————-
    mod_janewstickerassetsbut-next.png
    mod_janewstickerassetsbut-pre.png
    plg_jatabs_j15ja_tabsthemesrasiteh3-bg.gif
    plg_jatabs_j15ja_tabsthemesrasitestyle.css
    plg_jatabs_j15ja_tabsthemesrasitetitle-bg.gif
    plg_jacomment_integrate.zip
    —————————————————————-

    UPDATED in 1.4.1
    —————————————————————-
    mod_jabulletin_j15helper.php
    mod_jabulletin_j15jaimage.php
    mod_jamegamenumod_jamegamenu.xml
    mod_janews2helper.php
    mod_janews2jaimage.php
    mod_janews2mod_janews2.xml
    mod_janews_fp_j15elementsjaparamhelper.php
    mod_janews_fp_j15helper.php
    mod_janews_fp_j15mod_janews_fp.xml
    mod_janewstickerassetsscript.js
    mod_janewstickerassetsstyle.css
    mod_janewstickertmpldefault.php
    mod_janewstickertmpljssetup.php
    mod_janewstickermod_janewsticker.xml
    mod_twitter_j15mod_jatwitter.xml
    plg_jabookmark_j15plg_jabookmark.xml
    plg_japopupplg_japopupfancyboxfancybox.php
    plg_japopupplg_japopupgreyboxgreybox.php
    plg_japopupplg_japopuphighslidehighslide.php
    plg_japopupplg_japopupmultiboxtmpldefault.php
    plg_japopupplg_japopupmultiboxmultibox.php
    plg_japopupplg_japopupthickboxthickbox.php
    plg_japopupplg_japopuphelper.php
    plg_japopupplg_japopuppopupHelper.php
    plg_japopupen-GB.plg_system_plg_japopup.ini
    plg_japopupplg_japopup.xml
    plg_jatabs_j15ja_tabsthemesuranistyle.css
    plg_jatabs_j15ja_tabsparser.php
    plg_jatabs_j15ja_tabs.php
    plg_jathumbnailen-GB.plg_content_plg_jathumbnail.ini
    plg_jathumbnailplg_jathumbnail.php
    plg_jathumbnailplg_jathumbnail.xml
    plg_jazinjazin.xml
    plg_usersettingplg_jausersetting.xml
    —————————————————————-

    Plugin plg_jacomment renamed to plg_jacomment_integrate, but content is the same.

    jimg Friend
    #337248

    Is there any reason why method=”upgrade” isn’t included in the install= statement in the .xml manifest of all updated extensions / templates?

    example – from plg_jausersetting.xml

    <install version="1.5" type="plugin" group="system" >
    to


    <install version="1.5" type="plugin" group="system" method="upgrade">

    That would make all these updates a lot easier…

    wendywu Friend
    #337513

    any easy way to upgrade?

    gray Friend
    #337514

    <em>@wendywu 171054 wrote:</em><blockquote>any easy way to upgrade?</blockquote>

    You can update only changed/new files of the template and extensions you use (comparision is make with version 1.4).

    Still remember to keep back-ups of any replaced files. And if you have applied hacks in the files which are updated in 1.4.1, you should re-apply them back.

    raomeka Friend
    #340684

    Hi, If I just copy these files then the upgrade should be done?

    gray Friend
    #340795

    <em>@raomeka 174987 wrote:</em><blockquote>Hi, If I just copy these files then the upgrade should be done?</blockquote>

    Yes, if you overwrite all files updated in 1.4.1 and copy the new ones, with weren’t in 1.4.1 you would get an updated version. Don’t forget about hacks, if any, which have to be re-applied in 1.4.1 updated/new files.

    Also look at the new Download/Compare system which is rather helpful.

Viewing 15 posts - 1 through 15 (of 29 total)

This topic contains 29 replies, has 17 voices, and was last updated by  gray 14 years, 5 months ago.

We moved to new unified forum. Please post all new support queries in our New Forum