Joomla Templates Club 406,261 posts

[gustavoi Friend gustavoiJoin date: February 2015Posts: 24Downloads:0Uploads:0 Thanks: 7]

#719205

Hi, on JA Puresite I ‘m using the user7 position for the main picture of the site and to position 8 for JA Side news an in image above:

I need to reverse actual proportion changing :

User7 from 25% to 75%
User8 from 75% to 25%

can you help me?

thanks in advance
gustavo

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#719313

Hi

I switched your positions width

Check image below to see how this was done

You can find documentation about this HERE

<blockquote>Custom width

Expression: <block name=”top-spotlight” type=”spotlight” special=”left” specialwidth=”25″>user1,user2,user3,user4,user5</block>
Purpose: – this will override the default 20% width for a single position within the layout, it could be the one in the right side, it could be the one in the left side, but let’s examine these parameters closer:

special=”left” – this defines where is the module we want to use the custom width: left or right
specialwidth=”25″ – this defines the new width value for this module within the spotlight block.</blockquote>

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#753000

Hi

I switched your positions width

Check image below to see how this was done

You can find documentation about this HERE

<blockquote>Custom width

Expression: <block name=”top-spotlight” type=”spotlight” special=”left” specialwidth=”25″>user1,user2,user3,user4,user5</block>
Purpose: – this will override the default 20% width for a single position within the layout, it could be the one in the right side, it could be the one in the left side, but let’s examine these parameters closer:

special=”left” – this defines where is the module we want to use the custom width: left or right
specialwidth=”25″ – this defines the new width value for this module within the spotlight block.</blockquote>

[gustavoi Friend gustavoiJoin date: February 2015Posts: 24Downloads:0Uploads:0 Thanks: 7]

#720192

Thanks for your configuration changes, they improved very much.

But I still need to make the JASideNews module occupies 100% of User8 (now it uses only 25% or 30%, image below)

Could you help me?

Thanks
Gustavo

[gustavoi Friend gustavoiJoin date: February 2015Posts: 24Downloads:0Uploads:0 Thanks: 7]

#753204

Thanks for your configuration changes, they improved very much.

But I still need to make the JASideNews module occupies 100% of User8 (now it uses only 25% or 30%, image below)

Could you help me?

Thanks
Gustavo

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#720229

<blockquote>But I still need to make the JASideNews module occupies 100%</blockquote>

Your request before was to reverse space available for positions

<blockquote>User7 from 25% to 75%
User8 from 75% to 25%</blockquote>

Code i suggested above is doing what you asked , user 8 position is taking 25% of total available space , your question is not clear , what you mean with 100% ? if you want only the user8 position then remove the user7 in this way it will take all available space.

1 user says Thank You to pavit for this useful post

1. gustavoi

[pavit Moderator pavitJoin date: September 2007Posts: 15749Downloads:199Uploads:2274 Thanks: 417 Thanked: 4028 times in 3778 posts]

#753241

<blockquote>But I still need to make the JASideNews module occupies 100%</blockquote>

Your request before was to reverse space available for positions

<blockquote>User7 from 25% to 75%
User8 from 75% to 25%</blockquote>

Code i suggested above is doing what you asked , user 8 position is taking 25% of total available space , your question is not clear , what you mean with 100% ? if you want only the user8 position then remove the user7 in this way it will take all available space.

1 user says Thank You to pavit for this useful post

1. gustavoi

[gustavoi Friend gustavoiJoin date: February 2015Posts: 24Downloads:0Uploads:0 Thanks: 7]

#720277

User 7 and user8 are Ok with your configuration changes.

After that, my problem was make JASideNews ocupy 100% of User8 (JASideNews was ocupying only 33% of User 8) buy I already solved modifying file “/css/mod_jasidenews.css” changing:
#ja-topsl2 .ja-slidenews-item {
padding: 0;
float: left;
width: 33% -> changing to 100%

Now It is Ok. Thank You very much!

[gustavoi Friend gustavoiJoin date: February 2015Posts: 24Downloads:0Uploads:0 Thanks: 7]

#753289

User 7 and user8 are Ok with your configuration changes.

After that, my problem was make JASideNews ocupy 100% of User8 (JASideNews was ocupying only 33% of User 8) buy I already solved modifying file “/css/mod_jasidenews.css” changing:
#ja-topsl2 .ja-slidenews-item {
padding: 0;
float: left;
width: 33% -> changing to 100%

Now It is Ok. Thank You very much!

[Author]

Posts